Installation

Frigate is a Docker container that can be run on any Docker host including as a HassOS Addon. Note that a Home Assistant Addon is not the same thing as the integration. The integration is required to integrate Frigate into Home Assistant.

Dependencies

MQTT broker (optional) - An MQTT broker is optional with Frigate, but is required for the Home Assistant integration. If using Home Assistant, Frigate and Home Assistant must be connected to the same MQTT broker.

Preparing your hardware

Operating System

Frigate runs best with docker installed on bare metal debian-based distributions. For ideal performance, Frigate needs access to underlying hardware for the Coral and GPU devices. Running Frigate in a VM on top of Proxmox, ESXi, Virtualbox, etc. is not recommended. The virtualization layer often introduces a sizable amount of overhead for communication with Coral devices, but not in all circumstances.

Windows is not officially supported, but some users have had success getting it to run under WSL or Virtualbox. Getting the GPU and/or Coral devices properly passed to Frigate may be difficult or impossible. Search previous discussions or issues for help.

Storage

Frigate uses the following locations for read/write operations in the container. Docker volume mappings can be used to map these to any location on your host machine.

/config: Used to store the Frigate config file and sqlite database. You will also see a few files alongside the database file while Frigate is running.
/media/frigate/clips: Used for snapshot storage. In the future, it will likely be renamed from clips to snapshots. The file structure here cannot be modified and isn't intended to be browsed or managed manually.
/media/frigate/recordings: Internal system storage for recording segments. The file structure here cannot be modified and isn't intended to be browsed or managed manually.
/tmp/cache: Cache location for recording segments. Initial recordings are written here before being checked and converted to mp4 and moved to the recordings folder.
/dev/shm: It is not recommended to modify this directory or map it with docker. This is the location for raw decoded frames in shared memory and it's size is impacted by the shm-size calculations below.

Common docker compose storage configurations

Writing to a local disk or external USB drive:

version: "3.9"
services:
  frigate:
    ...
    volumes:
      - /path/to/your/config:/config
      - /path/to/your/storage:/media/frigate
      - type: tmpfs # Optional: 1GB of memory, reduces SSD/SD Card wear
        target: /tmp/cache
        tmpfs:
          size: 1000000000
    ...

Calculating required shm-size

Frigate utilizes shared memory to store frames during processing. The default shm-size provided by Docker is 64MB.

The default shm size of 64MB is fine for setups with 2 cameras detecting at 720p. If Frigate is exiting with "Bus error" messages, it is likely because you have too many high resolution cameras and you need to specify a higher shm size.

The Frigate container also stores logs in shm, which can take up to 30MB, so make sure to take this into account in your math as well.

You can calculate the necessary shm size for each camera with the following formula using the resolution specified for detect:

# Replace <width> and <height>
$ python -c 'print("{:.2f}MB".format((<width> * <height> * 1.5 * 9 + 270480) / 1048576))'

# Example for 1280x720
$ python -c 'print("{:.2f}MB".format((1280 * 720 * 1.5 * 9 + 270480) / 1048576))'
12.12MB

# Example for eight cameras detecting at 1280x720, including logs
$ python -c 'print("{:.2f}MB".format(((1280 * 720 * 1.5 * 9 + 270480) / 1048576) * 8 + 30))'
126.99MB

The shm size cannot be set per container for Home Assistant add-ons. However, this is probably not required since by default Home Assistant Supervisor allocates /dev/shm with half the size of your total memory. If your machine has 8GB of memory, chances are that Frigate will have access to up to 4GB without any additional configuration.

Raspberry Pi 3/4

By default, the Raspberry Pi limits the amount of memory available to the GPU. In order to use ffmpeg hardware acceleration, you must increase the available memory by setting gpu_mem to the maximum recommended value in config.txt as described in the official docs.

Additionally, the USB Coral draws a considerable amount of power. If using any other USB devices such as an SSD, you will experience instability due to the Pi not providing enough power to USB devices. You will need to purchase an external USB hub with it's own power supply. Some have reported success with this (affiliate link).

Docker

Running in Docker with compose is the recommended install method:

version: "3.9"
services:
  frigate:
    container_name: frigate
    privileged: true # this may not be necessary for all setups
    restart: unless-stopped
    image: ghcr.io/blakeblackshear/frigate:stable
    shm_size: "64mb" # update for your cameras based on calculation above
    devices:
      - /dev/bus/usb:/dev/bus/usb # passes the USB Coral, needs to be modified for other versions
      - /dev/apex_0:/dev/apex_0 # passes a PCIe Coral, follow driver instructions here https://coral.ai/docs/m2/get-started/#2a-on-linux
      - /dev/dri/renderD128 # for intel hwaccel, needs to be updated for your hardware
    volumes:
      - /etc/localtime:/etc/localtime:ro
      - /path/to/your/config:/config
      - /path/to/your/storage:/media/frigate
      - type: tmpfs # Optional: 1GB of memory, reduces SSD/SD Card wear
        target: /tmp/cache
        tmpfs:
          size: 1000000000
    ports:
      - "5000:5000"
      - "8554:8554" # RTSP feeds
      - "8555:8555/tcp" # WebRTC over tcp
      - "8555:8555/udp" # WebRTC over udp
    environment:
      FRIGATE_RTSP_PASSWORD: "password"

If you can't use docker compose, you can run the container with something similar to this:

docker run -d \
  --name frigate \
  --restart=unless-stopped \
  --mount type=tmpfs,target=/tmp/cache,tmpfs-size=1000000000 \
  --device /dev/bus/usb:/dev/bus/usb \
  --device /dev/dri/renderD128 \
  --shm-size=64m \
  -v /path/to/your/storage:/media/frigate \
  -v /path/to/your/config:/config \
  -v /etc/localtime:/etc/localtime:ro \
  -e FRIGATE_RTSP_PASSWORD='password' \
  -p 5000:5000 \
  -p 8554:8554 \
  -p 8555:8555/tcp \
  -p 8555:8555/udp \
  ghcr.io/blakeblackshear/frigate:stable

Home Assistant Operating System (HassOS)

caution

There are important limitations in Home Assistant Operating System to be aware of:

Utilizing external storage for recordings or snapshots requires modifying udev rules manually.
AMD GPUs are not supported because HA OS does not include the mesa driver.
Nvidia GPUs are not supported because addons do not support the nvidia runtime.

tip

If possible, it is recommended to run Frigate standalone in Docker and use Frigate's Proxy Addon.

HassOS users can install via the addon repository.

Navigate to Supervisor > Add-on Store > Repositories
Add https://github.com/blakeblackshear/frigate-hass-addons
Install your desired Frigate NVR Addon and navigate to it's page
Setup your network configuration in the Configuration tab
(not for proxy addon) Create the file frigate.yaml in your config directory with your detailed Frigate configuration
Start the addon container
(not for proxy addon) If you are using hardware acceleration for ffmpeg, you may need to disable "Protection mode"

There are several versions of the addon available:

Addon Version	Description
Frigate NVR	Current release with protection mode on
Frigate NVR (Full Access)	Current release with the option to disable protection mode
Frigate NVR Beta	Beta release with protection mode on
Frigate NVR Beta (Full Access)	Beta release with the option to disable protection mode

Home Assistant Supervised

caution

There are important limitations in Home Assistant Supervised to be aware of:

Nvidia GPUs are not supported because addons do not support the nvidia runtime.

tip

If possible, it is recommended to run Frigate standalone in Docker and use Frigate's Proxy Addon.

When running Home Assistant with the Supervised install method, you can get the benefit of running the Addon along with the ability to customize the storage used by Frigate.

In order to customize the storage location for Frigate, simply use fstab to mount the drive you want at /usr/share/hassio/media. Here is an example fstab entry:

UUID=1a65fec6-c25f-404a-b3d2-1f2fcf6095c8 /media/data ext4 defaults 0 0
/media/data/homeassistant/media /usr/share/hassio/media none bind 0 0

Then follow the instructions listed for Home Assistant Operating System.

Kubernetes

Use the helm chart.

Unraid

Many people have powerful enough NAS devices or home servers to also run docker. There is a Unraid Community App. To install make sure you have the community app plugin here. Then search for "Frigate" in the apps section within Unraid - you can see the online store here

Proxmox

It is recommended to run Frigate in LXC for maximum performance. See this discussion for more information.

ESX

For details on running Frigate under ESX, see details here.

Dependencies​

Preparing your hardware​

Operating System​

Storage​

Common docker compose storage configurations​

Calculating required shm-size​

Raspberry Pi 3/4​

Docker​

Home Assistant Operating System (HassOS)​

Home Assistant Supervised​

Kubernetes​

Unraid​

Proxmox​

ESX​